|
DSpace - Tor Vergata >
Facoltà di Ingegneria >
Tesi di dottorato in ingegneria >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/2108/592
|
Full metadata record
| DC Field | Value | Language |
|---|
| contributor.advisor | Salmeri, Marcello | - |
| contributor.author | Cambriani, Piero | - |
| date.accessioned | 2008-08-29T07:58:11Z | - |
| date.available | 2008-08-29T07:58:11Z | - |
| date.issued | 2008-08-29T07:58:11Z | - |
| identifier.uri | http://hdl.handle.net/2108/592 | - |
| description | 19. ciclo | en |
| description.abstract | The job developed in this thesis has been that to plan an electric circuit that realize an analog beamforming with two dipole spar, related to the receiving chain of the systems RFID, in the UHF
(860÷868 MHz) frequencies band. Such a project puts in evidence a solution of system and the
realization of the circuit it is a part of it. In fact the use of two spar allows to increase the general
profit in comparison to a single spar and therefore to exploit such advantage for the range of action
of the device or to parity of this last to decrease the power in transmission. The circuit reduces to
zero the phase between the signals received by the two spar allowing to drive the principal lobe of
the diagram of spar in direction of the transmitter or rather that of maximum field of radiation, so
maximizing the received signal. The circuit is constituted by varicap diodes which inversely
polarized works as capacitances controlled in voltage. The same function is developed by the MOS
varactor but the choice of the diodes it is due to the fact that in the MOS varactor the variation of
the capacitance is at the most of 2 pF while with the varicap they reach variation of 15-18 pF
allowing to reduce to zero the phase between the signals on a greater range of delays. This allows us
to check and to reset the bewilderment among the induced signals around two spar making to vary
the voltage of polarization. This happens changing the phase of the received signal by one of the
two spar of 90° through a net realized with the diodes opportunely polarized in the point of select
rest in a linear zone of the characteristic ability-tension of the varicap. Then the signals are
opportunely amplified and multiplied. The output of the multiplier is filtered getting a value of
proportional continuous tension to the bewilderment of the two signals. This tension is applied, in
reaction, on the diodes making to vary their polarization, therefore the value of their ability until to
reduce to zero the difference of phases. To this point the value of the continuous tension to the
output of the multiplier is void, we have so corrected the error of phase. To correct the error of
phase means to aim the lobe of radiation of the spar in the direction of maximum field. The circuit
corrects a bewilderment among the signals equal to 0.15 ns. The two spar allow us to get a double
profit in comparison to the single spar. This allows us to choose whether to decrease the power in
transmission of 2 or to increase the range of action of the device, practically than in base to the
equation that exists between the power of transmission and the power in receipt among two spar, a
transmitting station and the other receiver.
The circuit in matter, being realized with discreet components has enough elevated consumptions of
power, 12 V of power supply, as well as the noise and the parasitic capacitances are greater in
comparison to an integrated device. For this reason in a future development of integrated circuit
realization on silicon, the required amplifications will surely be smaller and therefore to reduce
notably the consumption of power. This will also allows the use of such a circuit on the semipassive
or active tags.
At present, the component discreet electric scheme of the design surely allows the use in the reader. | en |
| format.extent | 1010152 bytes | - |
| format.mimetype | application/pdf | - |
| language.iso | it | en |
| subject | beamforming | en |
| subject | RFID | en |
| subject | direttività | en |
| subject | diodi varicap | en |
| subject | array factor | en |
| subject | errore di fase | en |
| subject | dipolo | en |
| subject.classification | ING-INF/01 Elettronica | en |
| title | Realizzazione di un beamforming analogico per sistemi RFID | en |
| type | Doctoral thesis | en |
| degree.name | Dottorato in ingegneria delle telecomunicazioni e microelettronica | en |
| degree.level | Dottorato | en |
| degree.discipline | Facoltà di ingegneria | en |
| degree.grantor | Università degli studi di Roma Tor Vergata | en |
| date.dateofdefense | A.A. 2006/2007 | en |
| Appears in Collections: | Tesi di dottorato in ingegneria
|
Files in This Item:
| File |
Description |
Size | Format |
|---|
| Tesi_PieroCambriani.pdf | | 986Kb | Adobe PDF | View/Open |
|
Show simple item record
All items in DSpace are protected by copyright, with all rights reserved.
|
